smart pressure transmitter Rosemount 3051 1151

How to correct use smart pressure transmitter Rosemount 3051 1151 ?

Keep the mounting hole clean:

keep the hole clean and prevent the material from clogging. It is important to ensure the normal operation of the equipment.

All pressure sensorsshould be removed from the machine barrel to avoid damage before the extruder is cleaned.When the sensor is removed, the material may flow into the mounting hole and harden.


If the residual material is not removed, the top damage may be caused when the sensor is installed again.The cleaning kit can remove the material from the melt.However, repeated cleaning processes may deepen the damage caused by the mounting hole to the sensor.If this happens, measures should 

More pressure transmitter specification welcome contact  24h/7days service