Industrial Liquids Electromagnetic Flowmeter China Manufaturer

Main Application:Water, Wastewater, Corrosive Liquid/Gas

Size:Dn 15-800 (1/2" to 31-1/2")

Sensor:Tube/Flange

Application:Enviromental, Industrial

Type:Electromagnetic Flow Meter

Measuring Media:Liquid

Measuring Principle:Electrical Principles

Measurement Object:Closed Pipeline

Certification:CE, SGS, ISO

Package:Carboard Box, Wooden Case

Trademark:AEAD

Origin:Shanghai

Item: Magnetic  Flowmeter

Velocity Range:0.2~8 M/S (0.66 to 26.26 Ft/S)

Electrode:316L, Hc, Hb, Ti, Ta

Output:4-20mA DC, Pulse, RS485

Pressure Range:0~16 MPa

Media Temperature:Max 150 C

Ambient Temperature:Sensor 80 C, Converter 50 C

Power Supply:220VAC or 24VDC

Grounding:Made Into Third Electrode

Lining Material:F4, PTFE, F46, Fs, Rubber

HS Code:9026100000

Applicable media

liquid with conductivity > 5 uS / cm

Accuracy

0.5%FS, 1.0%FS

Process connection

flange, ANSI / GB / JIS, 1.0MPa, 1.6MPa, 4.0MPa, 16MPa optional

Processing temperature

-20 to 150°C, according to lining material

Ambient condition

-40 to 80&#176;C, relative humidity <95%

Power supply

AC220V, 50Hz / DC24V / battery

Display

backlight LCD

Operation

4 light touch buttons

Signal output

4-20mA, loading resistance 750&#937;,

pulse, 0-3kHz, 5V,

RS485

Consumption

<8W

Cable inlet/outlet

M20*1.5

Protection

transducer IP68, converter IP65

Tube material

carbon steel, stainless steel optional

Lining material

PTFE, rubber, polyurethane, F46, Fs optional

Electrode material

stainless steel, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum optional

Grounding

made into a third electrode, same material with electrode

Industries

chemical, environmental, metallurgical, pharmaceutical, papermaking, water supply and drainage, etc.

Lining material

Main Performance

Applications

Teflon

1.The most steady material in plastics which is resistible to boiling hydrochloric acid, vitriol fortis as well as strong alkali and organic impregnates.      
2.Not be perfect in abrasion resistance.

Strong corrosive mediums such as strong acid and alkali

F46

1.Have the same abrasion resistance with PTFE.
2.Resistable for low abrasion.
3.Having strong resistance to load pressure.

1.The same as PTFE.
2.Applicable in mediums of low abrasion.

Neoprene

1.Be of good elasticity, retractility and abrasion resistance.
2.Be resistant to low acid, alkali and salt but not for oxidation mediums.

Water, sewage and slurry, mineral serosity of low abrasion.

Polyurethane

1.Be of good abrasion resistibility.
2.Not be perfect in acid/alkali resistance.
3.Can't be used for water mixed with organic impregnants.

Applicable in mineral serosity, slurry and coal slurry of high abrasion.