EJA110A DP Pressure Transmitter Yokogawa Brand Exporter

EJA110A DP Pressure Transmitter yokogawa brand 

Transmitter Specifications：

Output：

Two wire 4 to 20 mA DC output with digital communications, linear or square root programmable.

 BRAIN or HART FSK protocol are superimposed on the 4 to 20 mA signal.

Bolting ：

SCM435, SUS630, or SUH660

Housing ：

Low copper cast-aluminum alloy with polyurethane

paint (Munsell 0.6GY3.1/2.0)

Degrees of Protection ：

IP67, NEMA4X, JIS C0920 immersion proof

Fill Fluid ：

Silicone, Fluorinated oil (option)

Name plate and tag ：

SUS304 or SUS316 (option)

Specification Conformance ：

The model EJA110A maintains a specification conformance to at least 3 .

Isolating Diaphragms ：

316L SST or Alloy C-276

Stability ：

0.1 % of URL per 60 months (M, H and V capsules)

0.2 % of URL per 12 months (L capsule)

Supply Voltage ：

10.5 to 42 V DC for general use and flameproof type

10.5 to 32 V DC for lightning protector (Optional code/A)

10.5 to 30 V DC for intrinsically safe, Type n, nonincendive, or non-sparking type

Minimum voltage limited at 16.4 V DC for digital communications, BRAIN and HART

Basic Information :

The high performance differential pressure transmitter model EJA110A can be used to measure liquid, gas, or steam flow as well as liquid level, density andpressure. It outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Model EJA110A also features remote setup and monitoring through communications with the BRAIN™ terminal and CENTUM CS™ or
XL™ or HART® 275 host.

Dimensions :

Model EJA110A

Vertical Impulse Piping Type

Process connector upside (INSTALLATION CODE '6') (For CODE '2' or '3,' refer to the notes below.)

Contact now :

Email:newsales12@vip.163.com /tong.sales08@outlook.com |