Rosemount 1151 Pressure Transmitter

Rosemount 1151 Pressure Transmitter
Product Details

Rosemount 1151 pressure transmitter


Feature :

Power Supply The DC power supply should provide power with less than 2% ripple. The total load is the sum of the resistance of the signal leads and the load resistance of the controller, indicator, and related pieces. The resistance of intrinsic safety barriers, if used, must be included. Figure 2-7 illustrates power supply load limitations for the transmitter.The signal terminals and test terminals are located in a compartment of the electronics housing that is separate from the transmitter electronics. The nameplate on the side of the transmitter indicates the locations of both of these compartments. The upper pair of terminals are the signal terminals and the lower pair are the test terminals. The test terminals have the same 4–20mA output as the signal terminals and are only for use with the optional integral meter or for testing.



1. Complete variety, high precision, good stability, and the price is cheaper than similar imported instruments;

 2. Adopt a two-wire working mode;

3. The sensitive components are solidified, compact and strong, and have strong anti-vibration capability;

4. The main components can be interchanged with 1151 similar products;

5. Key components, electronic components and connectors are all internationally high quality products. This series of products has good reliability, stable quality and low failure rate;

6. Positive migration can reach 500%, negative migration can reach 600% (at the minimum range);

7. Damping adjustable


Teachnical parameters :




Products show :



Why chose us :